Shanky Technologies Poker Bot Support Forum

General Category => Marketplace: Add-on Software and Services => Topic started by: Balu66 on April 12, 2011, 09:08:47 PM



Title: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on April 12, 2011, 09:08:47 PM
(http://img543.imageshack.us/img543/5672/latv442all.png)

-- Current Version V 5.1.3 --

What is LAT for?

Basically LAT displays and prepares statistical data from your log files in an good shape
so that you can identify the profiles weak and strong code lines very quick.

LAT can help you a lot to improve the Performance of your Profile with little changes on those Lines which LAT identifies as weak lines.

LAT is a kind of Quality Control for your Profile. Think of always loosing on the same line and you don't realize this - can be expensive. Let bot play in the night - check logs on next day.

LAT works with MTT- SNG- and Cash profiles.

LAT collects Thousands of played hands and is not getting tired, nor getting bored, to do this.
If you think of buying LAT later - dont throw away profile logs - they can be worth much! Start collecting and sorting now instead.


Personally, before LAT I used to note down every time the bot or better the profile made stupid or questionable decisions.
Collecting these notes in a sheet is easy, but there is no guarantee that I noted every remarkable move, especially near to final table.
Also, good decisions were not so much included into those notes. But its also neccessary to complete the picture of Profile Lines.

With LAT all logged data are now available for statistical analysis.

Generally, the more hands are read in - the better the quality of  results to identify weak and strong lines.

Here is an example how LAT practically works ...
1. Put LAT.exe, Profile and refering logs into a new folder
2. Select Profile.txt File
3. Select Logs
4. perhaps Menu <Filter Fold Actions ON>
5. Start analysing with Quick Overview
6. Select Lines with eye catching Stats and go into Detailed View
    Here you find more Details,  
      Profilecode with some neighbor Lines
         and again stats for the Line you selected

With this Data you should come to question yourself:
sufficient Data collected? – the Results Tendency is obvious?
If so, change the Line (within your TextEditor) – revise the call to fold / change the Handrange for this Line, increase Betsize, and so on ...

But important for tweaking, read on Message #2 about
--> FAQ:  Adding and Deleting Lines of a Profile

Here some impressions ...

(http://img833.imageshack.us/img833/6291/searchbyhandv47.png)

(http://img855.imageshack.us/img855/2679/detailviewv47.png)

(http://img836.imageshack.us/img836/581/searchbyhandv47pic2.png)

Available Data View (LAT V4.2+):
(http://img585.imageshack.us/img585/9343/latv42availabledatacron.png)


Some important Things:


Supported Profile Typs:
LAT is only for  .TXT Profiles -  to say it clear: .ppl Files NOT possible to analyse.

Always run Bot in Verbose Mode - so you see Succint in the Menu; this is neccessary since LAT make use of Bot Variables
BB, TI, STACK, .... (Verbose Mode is default configuration when you download from Shanky, so usually you do not need to switch)


Supported Rooms:

iPoker - Gutshot, BETnGo, Titan, Titan.Fr, Genting, William Hill, Sisal, Poker770, Betfred, PaddyPower
UB
Minted - Everleaf
Full Tillt Poker (2010 ok, in case of resupporting of bot, LAT needs update perhaps)
Merge Network - Carbon, Players
PGN
Bodog  
888Poker

Already programmed, but not tested at the Moment: :  Cake, Red Star
In Princip these Rooms should also work since I used 2 different Methods to get Data, one which recognizes some Phrases of Logs, the otherone gets the Hand result by Stack Comparison.
Please give me feedback when you have tested those rooms! Thanks.
Looks like nobody playing here?

Other Features:

- User Defined Variables supported  thumbsup.gif  dankk2.gif tetre

- Search Results of Hand ... (Pict on Page 2)

- Never Executed Lines ... (Pict on Page 4)

- Fold Action Filter: toggle on/off and Fold Actions wont appear in stats

- Export Data to a "OutputHands.txt" so you are able to re-import it into your Excell or so.

- Missed Click Stats (per each LogFile and Total)

- Window resize for difference screen resolutions
  Mode 1: 800x600 px  
  Mode 2: 1024x768 px
  Mode 3: 1280x1024 px and higher
  For the start, LAT works in a simple Text based Console but the
  Lines of the Window need to fit into your Screen.
  So for this simply change the window size with Menu point 12 (in toggle mode)


New Ideas and/or  ToDo's

- support for 5Poker5 (Everleaf)
- Ouput 40 most executed Profilelines (sorted w/o folds)
- Handrange stats

Other Details to LAT in following FAQ!


-------------------------------------------------------------------------------------------------------------------------

    Pricing:  

    $ 79       NO MORE SELLING SINCE I CANNOT GIVE SUPPORT TO NEW ROOMS

-------------------------------------------------------------------------------------------------------------------------



Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on April 12, 2011, 09:10:01 PM
FREQUENTLY ASK QUESTIONS:

Windows System:
LAT is tested on WinXP, Vista, Win7 (32&64bit)

Pokerrooms supported:
LAT works generally with two Methodes to get the Result of a Hand
1. Stack comparision and
2. Recognition of Textphrases like „PlayerXZ wins“    or „PlayerXZ wins main pot“.

The more secure Methode is Recognition of Textphrases (applied at UB and FT). Here Rebuys, AddOns or simply Reloading by buying additional Chips do not produce wrong Results.

The Disadvantage of Stack comparison (applied at all others than UB and FT) is that any wrong Stack written in Log is interpretated wrong too.
This happens seldom but it can happen when switching to manual Play and again back to Autoplay; here sometimes the stack is read wrong (e.g. Stack = 1.00). Perhaps you already noticed this. (By the way - from Version 4.7 we use Stack = 1.00 as recognition of manual play !)
In this Case the Outcome of the Hand is …. as it is when Comparing Stack of current Hand with Stack of last Hand – and this can be the wrong Result. If you notice this, you can correct the Logfile later.

Our Logs do still miss a Rebuy Info - I already asked Egor to integrate this but this needs some work and up to now we dont have this Rebuy/Addon Info in the logs. This can cause wrong results within LAT, since LAT compares Stacks to get the results.

In all other cases Stack comparision works very good. Logs are virtually appended, but LAT recognizes this and declares the outcome of the last Hand of a log for VOID (since there is nothing to compare with)

So back to Pokerrooms, LAT current List can be found on Message No. 1 of this Thread.


Any limitations on Cash games / SNGs / MTTs ?
All 3 types of holdem poker are generally supported.

Any limitations to Limits?

No Limits, NoLimit / Limit / Pot Limit, all possible.

Any limitations with amount of numbers of CodeLines?
Has been tested on profiles with about 125000 lines of code and LAT works really
good here. I think LAT is predestinated for large profiles.

Any limitations with number of imported Hands?
No, at the moment 200.000 hands x 30 Actions each possible.
More on request.  

Can LAT recognize a profilechange within one log?

Its on your response not to mix up different profiles. For example an Cashprofile mixed with MTT Profile. This makes no sense.
But – when you hold to my suggestion to name your profiles with version at the end, then you will see how your profile gets better and better while  you are tweaking your profile. For example „mtt-v1.10.txt“, „mtt-v1.11.txt“ and so on. This version number is displayed on LAT.

What about ppl Profiles?
Only Log Files from .txt Files can be analysed - .ppl is for some (good) reason NOT possible to analyse!

Important, when Profile has been changed / tweaked!
When modifying your Profile, please have in mind, LAT uses the Line Number to compare data. As a result when adding lines, all following Lines move down and your statistic is nothing worth. To avoid this, perhaps keep some free Lines if possible or add code on free lines.
In most Cases you will only change a call to a fold or sth like that. In this case we have no issue.

What is "direct won" or "assisted lost"?

WIN  direct = with this Line the Hand was won by the bot. One or more Actions, but we won finally with this Line. So the Line gets a a direct Win.

WIN  assist = this executed line was participated in a winning Hand, but it was not the last Action of the bot to decide the hand, just assisted the win.

LOST direct = this Action was the last in this Hand and it lead to a lost, or check and lost. A simple Fold Force line is a lost when this was the last Action in this Hand. Since a profile has lots of Fold Force Lines, a Fold Action Filter is integrated. Just toggle on/off

LOST assist = this Line was participated in the Loss of this Hand. Other Actions followed here and the Result of the Hand was a Loss.


What about missed Clicks?
Some Hands are VOID because of missed Clicks - as a result the complete Hand that means all refering Actions  not used for the data basis. This can happen, when switching to manual play and come back to automode again.

What is "L.C." in Detail View?
L.C. stand for Log Change. Everytime a new log is read - this is a kind of virtually append, the stack will change dramatically. This can happen in logs of pokerrooms where the methode Stack comparision is used to get win/lost info. The last Hand before LogChange cannot be compared to the next Stack - so the result gets a L.C. and its not getting into statistical database.

What about a Demo of LAT?
Sorry, at the moment no Demo available.

what happens if I have logs from different profile versions?
How does it differentiate them?
Or do I have to make sure that the logs are all from the same profile?

This goes into direction - -->Tweaking profiles, adding and deleting lines in Profile.txt

yes, important that logs use same profile (in meaning of the basic content) and the profile read in need also to fit to those profiles mentioned in logs. Otherwise the statistic is getting wrong.
But for example holdem1.log can have doodle91.txt   while holdem2.log  has uses a tweaked doodle91modV1.txt
Thats possible and it is reflected in Detailed View, which version has been used.

When there are changes within a line - NO ISSUE -  e.g. changing Range, Betsize .... and of course call --> fold or Raise 50% to Raise 55%          this is possible, no problem.


Tweaking profile, adding and deleting lines in Profile.txt
(But) be carefull to put additional lines into your profile because Lines after this Insert become new Line Numbers assigned.
This is only possible if there where blank lines available. Here you can do this.

Similiar on deleting lines. Instead of simple delete just blank this line and let a gap with "//" (Comments) between two filled lines.

A good idea is before starting to tweak - to insert some extra Emty Lines into your Profile on Locations where potential Tweaks are planned. When you do this, old log data cannot be used for LAT because then LinesNumbers are different and the Stats will be wrong.


Does LAT modify the Profile?
No, its up to you to do this if you want to tweak

Does LAT modify the Logs?
No

XL Profile within Logs - any Problems?
XL Profiles (100.000 Lines +) within Logs now possible and fast handled (Vers. 3.8.6+)

When running your program at Bodog, do I need a Bodog hand grabber to get the hands or does it just use the bot logs?
LAT uses only the logs of our bot. No handgrabber needed. LAT works offline, no connection to any software. You dont need to have LAT open when botting.

What Mode to run with bot so that LAT gets all neccessary data: Verbose or Succint?
I just learned that we should run in Verbose mode.
So we get these important info:
casino = UB, game = No Limit Tourny, BB = 10.00, Pot = 4 BBs, Stack = 1485.00, TI = 0 BBs
Since Bot toggle this mode you should see Succint in the Menu of bot.
This is also the default mode, everytime you download an update from shanky.
Again, after download you dont need to switch! We see Succint and run in Verbose. Thats correct.

What are Shared Chips - Shared BBs?
From LAT V4.2 a quantitative Output is provided and is measured in Shared Chips and Shared BigBlinds.
Reason: a Hand can have more Actions = Orbits = ProfileLinesExecuted
Example:
1st Action:  Call
2nd Action: Raise 3
3rd Action:  Raise 150%
In Case we have 20 BBs in Pot, the larges part gets 3rd Action, then 2nd Action and last but not least 1st Action.
This Win/Loss of a Profile Line is calculated in relation to partial Investment.
These partial Wins/Investments will be accumulated to a Profileline.
So with much logged Hands you get a value what the Code of the Line is worth.  party0007.gif

LATs result is not exact the same as in Log! Whats wrong?
Logs show rounded BBs, so a entry for Investment of Blinds with TI = 2 BB means it can be 1.51 ... 2.49 in reality.
So exact Result will be different to shown Result in LAT.
Same on Pot = x

Indicator in Overview shows weak Line with Factor 0.50  while Accumulated Chips show positiv Result - Why?
This is simply because of different Blinds. You can win 10x at BB=100 and loose 1x at BB=2000. In case both Blinds where execute with this line, you get a negative Result - vice versa.

Does LAT support new User Defined Variables (UDV)?
yes, LAT is tested with TETREs MSS Profile which absolutely exploits UDVs  dankk2.gif
In case of TETREs profile which had lots of UDVs CodeLines and only some Action Lines - in this case LAT was not helpfull since those UDV Lines have no explicite force command. As a consequence LAT cannot relate back from Action Line to refering UDV Line.
But again generally UDVs possible.

How much Logs do I need for analysing a profile?
This depends on the number of Lines of the profile.
Lets say, 5000 Lines Profile, perhaps 5% of those Lines are the most executed, most important lines. So we have about 100 Lines which need a deep Look at.
Would say for a first estimation each Line shoud be executed 10 Times. Look on Indicator, shared (accumulated) BBs and Chips.
If there is no clear direction then you will need more Hands to collect before modifying the line.
When you have a large Profile (30.000+ Lines), then you will need much more Hand (Line executions) before you will see a direction - Line is winning/neutral/loosing.

The more lines you have, the more hands needed to analyse. Thats statistic.
When playing with cash profiles, you can run 6 bots at once, so collecting Hands goes faster.
When playing a MTT Profile, you can run 2 bots parallel, so you need 3 times longer to collect those hands (approx.)

Is LAT able to recognize Manual Play and exclude those results from Statistics?
yes, LAT has a basic Manual Play Recognition - since Stack = 1.00 sometimes happen in Bot when switching to Manual Mode,
  I decided LAT to evalute every Hand with Stack = 1.00 as "void"
  As a result, this Hand is excluded from Stats.
  Only negative effect: for CashGamer with Stack = 1.00  - think thats ok
  But now we have a kind of Manual Mode recognition! (LAT V4.6+)

Why does LAT show "+" (won) but quantitative output is negative on accumulated BBs and Chips ?
Its possible e.g. in case more than one people win a game and sharing the pot (depending how much each player have been invested)
Qualitative Output shows "+" usually because of text phrase "player HERO wins ...". This is correct then HERO has less invested than opponent.
Thats one reason to present both  - quantitative and qualitative Results within LAT.
 


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Efu on April 12, 2011, 09:36:17 PM
veryvery intresting thumbsup.gif anim_37.gif party0007.gif


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: peamasii on April 12, 2011, 09:51:21 PM
yes want  party0007.gif


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Omega-panty on April 12, 2011, 11:18:28 PM
Seems like a real must program!
When are you going to release it? Still searching for testers? Free or sell?


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on April 13, 2011, 12:20:16 AM
Seems like a real must program!
When are you going to release it? Still searching for testers? Free or sell?
In my view the price is not a too high risk and I know it works with UB and iPoker Network. Also looked on Bodog and Merge logs - should work here.

Release on Wednesday evening.


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: cosmo27 on April 13, 2011, 04:30:36 AM
PM sent


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: piden on April 13, 2011, 01:49:26 PM
Looks interesting, nice with a new software as it is a while since some have released a new.
Good luck with the sale  thumbsup.gif


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Omega-panty on April 14, 2011, 09:23:50 AM
Will their be a demo to try out your program?
 dankk2.gif


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on April 14, 2011, 06:40:23 PM
Will their be a demo to try out your program?
 dankk2.gif
At the moment I dont think of a demo because those are easily cracked. I would recommend to wait until some feedback about LAT are comming in.


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: cosmo27 on April 14, 2011, 11:28:06 PM
This is a pretty cool little program. I would highly recommend for all the coders out there. Good support too. Nice job Balu
 beer.gif


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Blade on April 15, 2011, 01:43:39 AM
Yp, very nice tool! Great support!  thumbsup.gif


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on April 15, 2011, 07:23:24 PM
sorry for any delay, just came from work.

included a 1st version of new features EXPORT TO .TXT
Main data will be written into a OutputHands.txt  File for example to re-import it into a tabular sheet.
(Datas devided by Komma); you can input a free Filename. This File is written into LATs Folder.

Also fixed the Menupoint "Show All Available Data"

Update will be send soon.

Also thanks for your other proposals- todo list is getting longer and longer




Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Blade on April 15, 2011, 10:03:18 PM
Maybe you could post here a poll with functional top priorities so all can participate.


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on April 15, 2011, 11:07:46 PM
Maybe you could post here a poll with functional top priorities so all can participate.
not for the moment, I would say feel free to make proposal its an free discussion.
The engine is running, now we can tune it.


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Bluesmaster on April 17, 2011, 01:56:24 AM
Can you fix the images?

Thanks

Bluesmaster


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on April 17, 2011, 07:39:30 PM
Update of LAT just send

Found an error that caused that not all executed Lines were displayed - this is now fixed!

new Feature:
- NeverExecutedLines

I am aware that the shape how to display data needs some work.
Next update probably next week.


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on April 17, 2011, 08:04:09 PM
Looks interesting, nice with a new software as it is a while since some have released a new.
Good luck with the sale  thumbsup.gif
thanks, your copy is been send  dankk2.gif


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: piden on April 18, 2011, 04:00:54 PM
it is a really cool application you've made there, a great benefit for anyone who wont to tweak or program profiles  thumbsup.gif


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: jackal697 on April 18, 2011, 04:22:54 PM
Payment sent. Paypal. Couldn't add note to payment

Do you need anything else?

Thank you
jackal697


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on April 18, 2011, 06:27:24 PM
Payment sent. Paypal. Couldn't add note to payment

Do you need anything else?

Thank you
jackal697

Thanks, jackal697
Give and take  lolk.gif

LAT is on the way


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on April 22, 2011, 03:05:53 PM
Update on LAT V3.9 send out


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: jackal697 on April 22, 2011, 05:33:05 PM
What are the action numbers on Available Data screen

Cool Tool
gl
jackal697


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on April 22, 2011, 06:21:46 PM
What are the action numbers on Available Data screen

Cool Tool
gl
jackal697
each Hand can have more than one Action.
Action means a Line which is executed.
Example:
AKs      1     Line 1002      (a new Hand, 1st Action)
AKs        2   Line 1785      (same Hand, 2nd Action)
AKs          3 Line 2000      (....)
27        1
35s      1

I decided to write it with a little indent, so its easier to see that its the same Hand.


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on April 23, 2011, 06:25:16 PM
ok after problems sending emails with .exe onboard and the interims solution with renaming LAT.jpg  to  LAT.exe   ....
now I went to DropBox.

So in future Customers will get an invitation to download the update from DropBox as already done today.


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on April 25, 2011, 09:54:27 PM
LAT V3.9.3 on Dropbox
Fixed minor issue with LogChange Data


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: clefmoo on April 29, 2011, 08:53:26 PM
Just bought it Balu.
Look forward to using it.


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on May 01, 2011, 01:48:04 PM
First, for LAT users, I switch from dropbox to GoogleDocs.
So sorry for emails bombarding. Dropbox is emty now.
Please use Google Invitation in future.
Reason, more convinient and most of us already have a Google account.


Some little Improvements and a new Feature are ready to publish

- Menu resorted

(http://img690.imageshack.us/img690/83/menulatv398.th.jpg) (http://img690.imageshack.us/i/menulatv398.jpg/)

- DETAIL View now scrollable and added Column Direct/assisted to Results Column

(http://img839.imageshack.us/img839/4332/detailviewaddedda.th.jpg) (http://img839.imageshack.us/i/detailviewaddedda.jpg/)

- New Feature added:   Search Results of Hand ...

(http://img852.imageshack.us/img852/6214/searchresultsofhand.jpg) (http://img852.imageshack.us/i/searchresultsofhand.jpg/)

Hope you enjoy
Balu66


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: clefmoo on May 03, 2011, 09:51:28 PM
This tool is an excellent aid for anybody creating their own profile.
Well done Balu!


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: gonads on May 03, 2011, 10:13:44 PM
Thanks Balu dankk2.gif


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on May 04, 2011, 07:33:54 PM
Thanks,
For your info, you know I tried Google Docs to spread the Tool but GoogleDocs has still some issues and is still in Beta.
So back again to Dropbox.
Balu66


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on May 07, 2011, 12:56:56 PM
Hi, just want to inform you that I have no Internet Access at home until its repaired.
Hope this changes soon.  beer.gif Back again
Meanwhile I am working on Result of Line with Output in BigBlinds! Thats gona be the hammer!  fighting030.gif

just to inform you, still working on it and its not as easy as you probably suppose - but this feature will come soon.


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on May 16, 2011, 12:22:55 AM
Overview

(http://img861.imageshack.us/img861/4898/latv42overview.png)


Detailview

(http://img819.imageshack.us/img819/1554/latv42detailviiew.png)


AvailableData

(http://img585.imageshack.us/img585/9343/latv42availabledatacron.png)


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: fishysuckout on May 16, 2011, 12:54:53 AM
Payment sent. Paypal. Ty.  ;D


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: going_deaf on May 16, 2011, 01:22:06 AM
Hey Balu, would this work on a fixed limit profile?


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on May 16, 2011, 01:25:45 AM
Hey Balu, would this work on a fixed limit profile?


yes, I already done it.
But probably a short profile like 6maxLimit Project - I think you mean this - will be a bit disappointing because there are not so much highlights in it.
You will see some peaks but you already know these - I m sure.

LAT is predestinated for larger profiles.


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: going_deaf on May 16, 2011, 02:40:20 AM
Wow, I was thinking of my own code. If Chevy's code is too short to make a difference then mine will surely be too small. Your application looks really cool anyways.


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: spinner on May 16, 2011, 10:11:43 AM
Payment by moneybookers?


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on May 16, 2011, 06:37:28 PM
Wow, I was thinking of my own code. If Chevy's code is too short to make a difference then mine will surely be too small. Your application looks really cool anyways.
Oh, just had a look into 6maxLimit profile with only 1800 Hands / 3500 Actions. 6000 Profile Lines are quite a lot lines.

Here a pic showing some results as an example.

(http://img41.imageshack.us/img41/5249/latv4examplefixedlimitc.png) (http://img41.imageshack.us/i/latv4examplefixedlimitc.png/)


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: jackal697 on May 18, 2011, 04:54:08 PM
Any way to exit a screen without scrolling(spacebar) thru 20,000 hands? This is really helping my profile BTW

gl
jackal697


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on May 18, 2011, 08:19:58 PM
Any way to exit a screen without scrolling(spacebar) thru 20,000 hands? This is really helping my profile BTW

gl
jackal697

Sorry, you mentioned it already - of course ESC will be added in next update within some days - I hope.

edit, ESC done on some other procedures too.
Also new feature EV going quite good but still some fine tuning to do before update comes




Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on May 20, 2011, 09:22:29 PM
just to inform you, I am working hard on the new feature of LAT.
Still needs some work and validation, validation, validation ...
so, I hope the update will come this weekend.

edit:
woooops, new feature works for UB and MTTs and thats absolutely what we need  party0007.gif

Just found that CashGames where Methode Stackcompare is used still need a bit adjustment.
Cash Games and new Feature are also supported now.

Found there are still some exeptions like - not complete log or  - one Hand not found, ...

Some of these exeptions can be solved, some not. I'm sure there will be some more things to fix,
simply because I only run 2 Pokerrooms (UB and IPoker) now and have not enough logs.

If some of my customer have Logs with their prefered Pokerroom, which is not UB or IPoker then you can send it to me. I will validate it and make adaptions if needed. Since Logs need to include the profile, please only doodle or free working profiles!

So update probably tomorrow on Monday.
Thanks, Balu66



Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on May 24, 2011, 12:52:06 AM
Good news, LAT V4.2 including some very nice Features with quantitative Output  party0007.gif is ready to rollout on Tuesday evening.  party0052.gif  done party0052.gif party0052.gif

Some Pictures of new Overview, Detailview and AllAvailableData are to find on page 2

Also new, you need to register in 2 Steps as shown here:

In addition to the update Link you will get a 2nd Email with Registration code.

(http://img339.imageshack.us/img339/8751/latregistrationin2steps.png)

Please give me some time to rollout, thanks. - done -


I am aware that there will be some issues to fix - but I want you to help finding them.

VERY IMPORTANT:   Logs show rounded BBs, so a entry with TI = 2 BB means it can be 1.51 ... 2.49 in reality.
So exact Result will be different to shown Result in LAT.


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on May 24, 2011, 08:06:03 PM
Additionally to update ...
When you find an error then ...

1.  Check log for yourself, if you see why
     Sometimes there are datas missing because of bot interruption or ...

2.  you can send me your Log File, I need at least
the wrong hand
  one hand played before
    and one hand after wrong hand

I will check it. In case its a free profile, send me complete Log.
Before sending change your name to HERO or someting else.


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: One Eye JACK on May 27, 2011, 05:28:01 PM
Balu, This is a great piece of software. Well worth the money. It saves me a lot of time from taking notes. I would say this is a must have when it comes to tweaking profiles. dankk2.gif

One Eye Jack


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: TP4LiFE on June 01, 2011, 12:05:15 PM
This tool looksvery useful, i notice in your opening post it states the list of supported rooms, however i don't see FT listed there will it work with FT or do you plan to make it work for FT in the future?
Sorry if this has already been asked i didn't read through all posts.


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on June 01, 2011, 09:40:35 PM
This tool looksvery useful, i notice in your opening post it states the list of supported rooms, however i don't see FT listed there will it work with FT or do you plan to make it work for FT in the future?
Sorry if this has already been asked i didn't read through all posts.
LAT is already coded to work with FT Logs. There are only some little differences in output but it should work perfekt for FT.
I say should since I only used older FT logs, before I was banned.
In case the syntax has changed - I can adapt the code - no problem.
BTW, UB and FT use the same way to get the results of a game.


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: spinner on June 02, 2011, 06:00:49 PM
Nice tool to have to identify plays which I like and dislike quickly. Good job balu  thumbsup.gif


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on June 08, 2011, 11:29:15 PM
ok I just needed some timeout. I will go on with work on LAT - just to inform you.


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on June 18, 2011, 06:47:56 PM
Update of Log Analysing Tool  LAT V4.3 available

+ found error in DetailView, where Shared BB calculated to high. That was because ratio partial invested was taken as sum invested. Now Fixed.

+ Added Escape possibility to NeverExecutedLines Feature

Invitations already send out

Next Update will include Sharred Chips/BBs in Feature SearchByHand

Balu66


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: snapcracklepopperhead on June 23, 2011, 03:22:11 AM
only pain is multiple logs with the same name.

i found this handy tool which takes some of the manual renaming out of it if you want to consolidate all your log files in the same folder.

it is called Total Commander. http://www.ghisler.com/

any else got a solution to automate renaming a bunch log files to make them unique????


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: webber04 on June 23, 2011, 04:50:09 AM
u can write a small program to do this
if enough people want it ill write it for free as it will only take a small amount of time


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: snapcracklepopperhead on June 23, 2011, 05:55:05 AM
i'd use it

 party0007.gif

 dankk2.gif


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on June 23, 2011, 11:27:05 AM
when always starting from same bot location a rename of log file isn't neccessary since bot increments holdem.log files by default.
example:  holdem.log, holdem1.log, holdem2.log

Personally I use the name to give some attributes to the logs like
version of profile
which buyin - a profile can play good at microstakes but will be a looser in higher stakes
pokerroom - dito
day
time

some attributes already come automatic with help of hoppers from webber or keith

nevertheless webber, also interested


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: snapcracklepopperhead on June 24, 2011, 12:51:28 AM
errr Balu - I dont know what you're trying to say there.

anyway - automation where possible is king for me.

i use BC and it saves current logs in individual folders before starting new bots. however the folders all contain the same names for the logs.

so webber - if you create it - it will need to drill down into sub folders to grab the logs.

cheers

 thumbsup.gif


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on June 26, 2011, 05:58:48 PM
Hi LAT User,
found an issue with Logs from Pokerroom F T (and only this room):

First, searching the Playername was programmed wrong so that no positive result were recognised.
Also the quantitative Output to BBs and Chips were calculated but not displayed.

This is now fixed and the Update to LAT V4.4 will be rolled out this sunday evening to correct this.  


Balu66

edit1: Rollout done, every user should have 2 Mails (new RegCode and Invitation to GoogleDocsDownload)

edit2: V4.4:  Still some errors in quantitative output - sorry, so much exeptions, automatic reading is not as easy
          will do my best to come to an exceptable result. Will need some time.

edit3: looks much better now, could provide a fix, but also found an exception, when a Hand has no Action. This leads to wrong result, but will be handled with LAT. This I will work on for Tuesday, 28th and probably Fix download for you on same evening.

edit 4:   V4.4.1  Fixes issues of V4.4,  F T P Logs supported, quantitative Output works good now. Please use last Registration codes from V4.4.


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: snapcracklepopperhead on June 28, 2011, 11:51:48 AM
just a quick note re log files: i found a semi manual way to rename logs quickly.

find the logs for your profile using search to id the profile name in the log.
select them all. <ctrl + a>
press F2 (to rename)
type a number or letter to the beginning of the log it has focus on.
hit Enter.

and windows will append a (x) number to all log files selected.

 ;D


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: xiquetete on June 28, 2011, 01:52:40 PM
Just a silly question. Does LAT supports user defined variables available now on PPL?

Thans a lot.


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on June 28, 2011, 07:18:45 PM
Just a silly question. Does LAT supports user defined variables available now on PPL?

Thans a lot.

edited 2x    

Ok, now I ve read the PPL Manual and all current examples should NOT interfere the working of LAT,
because we have a LineNumber, a Hand from Statement Hand: xx  , and a command which tells the bot what todo (fold, call, bet .... )
As long as this command is not a UDV, LAT will work, I am quite sure, but its not tested up to now cause I have not such a profile.

What I have not found is to put a User Defined Variable directly before the FORCE command.
Egor said this is not possible.

--> UDVs welcome in LAT


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on June 28, 2011, 11:23:25 PM
just a quick note re log files: i found a semi manual way to rename logs quickly.

find the logs for your profile using search to id the profile name in the log.
select them all. <ctrl + a>
press F2 (to rename)
type a number or letter to the beginning of the log it has focus on.
hit Enter.

and windows will append a (x) number to all log files selected.

 ;D
dankk2.gif just tried it, yeah it works  thumbsup.gif


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on June 30, 2011, 10:39:03 PM
PGN supported by LAT  from V4.4.2
also added MissClicks Stats per File

LAT V4.4.2 already in my Download area


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: loloman on July 01, 2011, 12:44:03 AM
Hi!

I have created a little app to auto-rename the bot logs, copying them to another folder.

You only have to drag&drop one folder with the logs (can have subfolders) to the app.
Then, it will create another directory (in the same place as original), and will copy the bot
logs renaming them to holdem0.log, holdem1.log....

You'll need at least .net v2.(Already Installed in allmost PCs)

.net Framework 2 download:
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=0856eacb-4362-4b0d-8edd-aab15c5e04f5&displaylang=en (http://www.microsoft.com/downloads/en/details.aspx?FamilyID=0856eacb-4362-4b0d-8edd-aab15c5e04f5&displaylang=en)

Cheers!!

http://www.mediafire.com/?ebamvaln65nmtb8 (http://www.mediafire.com/?ebamvaln65nmtb8)

Here is the source code aswell:

Code:
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Text;
using System.Windows.Forms;
using System.IO;

namespace WindowsFormsApplication9
{
    public partial class Form1 : Form
    {
        public Form1()
        {
            InitializeComponent();
        }

        private void Form1_DragDrop(object sender, DragEventArgs e)
        {
            if (((String[])e.Data.GetData(DataFormats.FileDrop)).Length >1)
            {
                MessageBox.Show("Only one folder at a time please");
            }
            else
            {
                FileInfo file = new FileInfo(((String[])e.Data.GetData(DataFormats.FileDrop))[0]);

                if (!(file.Extension == ""))
                    MessageBox.Show("Enter One folder Please");
                else
                {
                    string[] files = Directory.GetFiles(file.ToString(),"*.log",SearchOption.AllDirectories);
                    string newfolder_name=file.ToString() + "_Logs_Renamed";
                    Directory.CreateDirectory(newfolder_name);
                    int i;
                    for (i = 0; i < files.Length;i++ )
                    {
                        File.Copy(files[i], newfolder_name + @"\holdem" + i.ToString() + ".log");
                    }
                    MessageBox.Show("All OK, " + i.ToString() + " logs found.\nCopied to " + newfolder_name);
                }
            }
            
        }

        private void Form1_DragEnter(object sender, DragEventArgs e)
        {
            if (e.Data.GetDataPresent(DataFormats.FileDrop))
            {
                e.Effect = DragDropEffects.Move;
            }
        }
    }
}


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on July 01, 2011, 01:09:00 AM
hey, cool utility and it works  dankk2.gif


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: loloman on July 01, 2011, 08:18:53 PM
hey, cool utility and it works  dankk2.gif

Thx!

Allways good to help people around here  thumbsup.gif


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Destiny on July 05, 2011, 02:12:04 PM
Hi. I am not doin to good with the bot thats why i just made the payment by pay pal for the LAT. Do You need anything else?
Hope im doing better then. Really looking forward to use it.


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on July 05, 2011, 07:55:52 PM
Hi. I am not doin to good with the bot thats why i just made the payment by pay pal for the LAT. Do You need anything else?
Hope im doing better then. Really looking forward to use it.
Hi Destiny, everything should be send out now. Thanks
Balu66


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Destiny on July 07, 2011, 01:20:28 AM
Hi Balu, received everything and it runs. Gonna Check it out now. Let you now whats happening.
Cool thanks.  thumbsup.gif


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on July 08, 2011, 07:50:30 PM
Update LAT V4.5.1 already send out

Added quantitative Output to Menupoint SearchByHand

(http://img39.imageshack.us/img39/7500/searchbyhand451.th.png) (http://img39.imageshack.us/i/searchbyhand451.png/)


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on July 13, 2011, 01:30:11 PM
One question for LAT users - has anybody an accont on Cake or RedStar AND already tested those Log files with LAT. Any issues there?
I just want to get rid of following ...

Already programmed, but not tested at the Moment: :  Cake, Red Star  dankk2.gif


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on July 14, 2011, 08:47:07 PM
Just a Tip, its praktical to run 2 instances of LAT parallel, feeding with same Input Logs
first LAT with Overview
second LAT with Detailed View
Adjust both Windows and your Text Editor with analysed Profile - good Handling to work on

Balu66


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on July 15, 2011, 09:36:32 PM
Important for LAT User:  Always run Bot in Verbose Mode - that means you will see Succint in Bots window. Otherwise LAT do not get BB, TI and STACk Info. As a result you will see NAN   (Not A Number) entry.

und fuer meine deutschen Juenger aus gegebenen Anlass: den BOT immer im VERBOSE Mode betreiben - aber Achtung, du siehst im Botfenster Succint, aber das ist ok. Ansonsten bekommt LAT nicht den noetigen BB, TI und STACK Info und wirft lauter "NAN" (keine Zahl) aus.
(Hintergrund: ToggleMode mit m.E. falscher Beschriftung)

I know, Jet Pilots have pushed such switches and sometimes this ended in a catastrophe

Balu66


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on July 17, 2011, 06:14:28 PM
Announcement:

Today last chance to get LAT Log Analysing Tool for 59 USD.

From 18.July new price will be 79 USD.


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Shankybot24 on July 28, 2011, 04:49:49 PM
LAT is a real help for me to find the holes and bad lines in my code.  party0007.gif

GREAT work Balu anim_37.gif thumbsup.gif character0028.gif


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on July 28, 2011, 07:35:05 PM
LAT is a real help for me to find the holes and bad lines in my code.  party0007.gif

GREAT work Balu anim_37.gif thumbsup.gif character0028.gif
Thanks Shankybot, next Update will eliminate some manual play results, so its more objective.
At the moment I dont have much time to test because of familiar problems.

New Version LAT V4.6 can be found near Version 4.5 in Download area.
Changes to find in Version History.
Customers will get Download Links this evening (done)
Balu66


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on August 06, 2011, 11:13:13 PM
Hi folks, today I will rollout LAT V4.7 with some nice improvements.

- marking Lines of Preflop, Flop, Turn, River  by color scheme
- Manual Mode recognition!
- wrong Logs will be identified and excluded instead of shutdown LAT.

For this Update I will send out new Registration Codes for all Users - sorry but thats my way of copy protection - hope you understand  dankk2.gif
(Old RegCodes for LAT no more work anymore on V4.7+)

Balu66

edit: 2 Mails, RegCod and Download Link are send


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on August 08, 2011, 09:02:08 PM
Here an Example when you see a LAT Stats like this ....     ???
---------

(http://img13.imageshack.us/img13/9388/errorcorrect.png)

-------------
now you should look into Logs ...  and you will see the issue ... :)

Shanky Technologies Holdem Version 6.0.7: Hand: Kc Jh
have KJ
Fold if any raise, raise if folds and no calls else call
Defend Big Blind
hands played in session = 157
Players = 3
in timer: players = 3, folds in game= 0, raises = 0, checks = 0, calls = 1, bets = 0, folds = 0
casino = XXXX, game = No Limit Tourny, BB = 4000.00, Pot = 2 BBs, Stack = 103438.00, TI = 0 BBs
Matching user defined condition at line 248, Action = raisepot force
click Bet Pot
HERO wins (15,600 chips).
OPPONENT wins (7,600 chips).

Shanky Technologies Holdem Version 6.0.7: Hand: 6d Kc
have K6
if opponents <=2, raise if no calls or raises and fold if re-raised
hands played in session = 158
Flop: Tc 2d Js
Board: 3 suits no possible straight
Players = 3
in timer: players = 3, folds in game= 1, raises = 0, checks = 0, calls = 0, bets = 0, folds = 0
casino = XXXX, game = No Limit Tourny, BB = 4000.00, Pot = 3 BBs, Stack = 116.00, TI = 0 BBs           banghead.gif
opponents = 2, position = first
Fold
Matching user defined condition at line 122519, Action = fold force
Players = 3
in timer: players = 3, folds in game= 2, raises = 0, checks = 0, calls = 0, bets = 1, folds = 1
casino = XXXX, game = No Limit Tourny, BB = 4000.00, Pot = 4 BBs, Stack = 110238.00, TI = 0 BBs
Matching user defined condition at line 124451, Action = fold force
OPPONENT wins (13,600 chips).


What you can do here is correcting the wrong Stack 116.00 - it was because of switch to manuall Mode - I know because I remember this situation and now I found it by instance.
 beer.gif
Shanky Technologies Holdem Version 6.0.7: Hand: 6d Kc
have K6
if opponents <=2, raise if no calls or raises and fold if re-raised
hands played in session = 158
Flop: Tc 2d Js
Board: 3 suits no possible straight
Players = 3
in timer: players = 3, folds in game= 1, raises = 0, checks = 0, calls = 0, bets = 0, folds = 0
casino = XXXX, game = No Limit Tourny, BB = 4000.00, Pot = 3 BBs, Stack = 110238.00, TI = 0 BBs     thumbsup.gif
opponents = 2, position = first
Fold
Matching user defined condition at line 122519, Action = fold force
Players = 3
in timer: players = 3, folds in game= 2, raises = 0, checks = 0, calls = 0, bets = 1, folds = 1
casino = XXXX, game = No Limit Tourny, BB = 4000.00, Pot = 4 BBs, Stack = 110238.00, TI = 0 BBs
Matching user defined condition at line 124451, Action = fold force
OPPONENT wins (13,600 chips).

So the corrected LAT Stats look now like this ...

(http://img69.imageshack.us/img69/341/laterrormanualcorrected.png)
 thumbsup.gif


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on August 16, 2011, 03:07:38 PM
Update of LAT V4.8 done, emails already send today - thats the best LAT ever!
Some calculations fixed. Absolutely worth updating.
 party0007.gif  party0007.gif party0007.gif
Personally I must say LAT optimized my MTT profile in a way
that I come more and more ITM and in last times also onto Final Tables.
Also thanks to Egor who helped me optimizing Final Table code.  dankk2.gif



Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on August 17, 2011, 05:56:25 PM
LAT V4.8 user please re-download software. There was a mismatch with Registration Codes.

When updating you need to remove the old LATreg.ini, cause there is the old RegCode inside.
(in case you have not done already)

Sorry for any inconvinience.  thumbsup.gif to ShankyBot - he always keeps an eye on me   beer.gif
Balu66


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on August 27, 2011, 02:44:27 PM
- Update to LAT V4.9 -

Fixed Feature NEVER EXECUTED LINES -  dankk2.gif BLADE

Now we see in ColorCode which lines have been executed or not, see the beginning of a block (light blue) and comments + empty Lines

In case a Block has only red Lines - so the Header (=Line beginning with WHEN and WITHOUT FORCE) has not been executed.
In case a Block has at least one executed line - so the Header was executed

(Example show only small Data Sample)
 
(http://img842.imageshack.us/img842/1873/latv49neverexelines1v2.png)

Also I added some stats Overall Profile:

(http://img690.imageshack.us/img690/9991/latv49neverexelines2v2.png)

Invitations already send out - no new Registration Code, use V4.7 or simply put LATreg.ini into V4.9 Folder.

Last week finished 1st in MTT 95% unassisted  party0007.gif

Happy Tweaking  - Balu66


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on September 12, 2011, 10:52:55 PM
just FYI, LAT 4.9+ is already able to read Sisal Logs.
 dankk2.gif andrix for your Log, some snapshots send to you.


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on September 17, 2011, 10:09:32 AM
LAT V4.9.1 minor Update send out - filtering hands with incomplete Log Info


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on September 21, 2011, 05:28:10 PM
for LAT User only:

FYI, found an error in connection with incomplete Log Info - fix is in work


edit:

Menu Point 6 now fixed, next comes Overview fix

Menu Point 1 (and 2) also fixed, looks good.

Just a bit testing and if everything ok I will provide the fix to all

- done -


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on September 24, 2011, 11:28:51 AM
LAT V4.9.2 Fix send out - filtering hands with incomplete Log Info because of manual play interruptions.  Tested on MTT and Cash games on large samples.
 dankk2.gif Andrix

Balu66


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on October 20, 2011, 06:56:32 PM
here some nice MTT Microstakes Results from October so far.
These are almost unassisted - in case I have the opportunity/time I do assist at final table.

(http://img338.imageshack.us/img338/7936/goodresultsokt11.png)

and the best is ... I know some other customers reach final tables regularly  8)


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on December 03, 2011, 11:42:53 PM
For LAT Customer,
Email is send for download of LAT V5.0

LAT now supports Minted Poker Site (Everleaf Network)

Balu66


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Lucker189753 on December 16, 2011, 02:45:18 PM
I want it 2!
 PM sent!


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on December 16, 2011, 07:18:11 PM
I want it 2!
 PM sent!
Thanks, done.


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: frenchfisch on December 28, 2011, 08:01:28 PM
Hi
 doest it work with Titan.fr ?


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on December 29, 2011, 08:21:20 AM
to check this I need a log file of this poker room since I have no account there.

my email:     caos.pur@gmail.com


 Balu66


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on December 30, 2011, 09:20:22 AM
Hi
 doest it work with Titan.fr ?

Thanks frenchfisch,
I have added  Titan.Fr  of iPokerNetwork to the List of supported Rooms.
No other changes.

Latest Version is LAT V5.1 (rolled out on 30-Dec-2012)

Happy New Year  party0007.gif
Balu66


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Stonymann on February 19, 2012, 03:53:07 PM
I'm having a lots of problems with LAT because with the bot is misreading stacksize at cake. Are you analyzing logs at Cake and are you having the same problems?

Stonymann


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on February 20, 2012, 08:10:53 PM
I'm having a lots of problems with LAT because with the bot is misreading stacksize at cake. Are you analyzing logs at Cake and are you having the same problems?

Stonymann

I do not have a Cake account. When bot is misreading stacksizes so LAT will not work too.

PM me an example log and I will check.

Balu66


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: whoremonger on March 18, 2012, 04:55:15 AM
just sent over payment. cant wait to try! anim_37.gif


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on March 18, 2012, 04:07:40 PM
just sent over payment. cant wait to try! anim_37.gif

just send, thanks

Balu66


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: whoremonger on March 18, 2012, 05:37:44 PM
just send, thanks

Balu66

i dont do have it. dankk2.gif


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on March 19, 2012, 09:14:46 PM
I would like to give LAT support for new rooms.

Can somebody send me a piece of log (1st hand and some winning hands please)  from those rooms 770  and b365.

Please send per PM   dankk2.gif


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: peamasii on September 13, 2012, 08:22:47 PM
Does it work with 770 yet?


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on September 26, 2012, 04:07:03 PM
i can Adapt it to Work With 770 in case someone sends me a piece of Log with 770 Output.


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: peamasii on September 30, 2012, 11:45:16 AM
OK, I sent you a 770 log on gmail.  dankk2.gif


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on September 30, 2012, 05:19:09 PM
LAT V 5.1.1 is rolled out - email already send to registered users.

Now Logs from Pokerroom Poker770 can be read.

Old Registration code - no change

***********************************************
When Ordering LAT please give me
an additional Info on this Platform as message
cause it already happend that google sorts order into Spam
***********************************************


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: pollackm on October 28, 2012, 10:07:05 AM
BetFred also supported from iPoker network?


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on October 29, 2012, 09:00:00 PM
please send me a bots log file where you played at BetFred and I will adapt LAT so that BetFred will be supported too.


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on October 29, 2012, 09:07:39 PM
*************
*** Please Note that from 1.Nov. - 1.Dez 2012 I have NO access to Internet  :o ***

*** that means I cannot deliver the LAT software - so please wait until 1st week of Dec.2012 ***
*************

Balu66


done


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on November 01, 2012, 12:19:14 PM
New Version of LAT V5.1.2 - Log Analysing Tool

now Logs from Betfred and Paddy Power can be read into LAT.

Invitations to download already send to customers.

Happy tweaking,
Balu66


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on November 11, 2012, 11:06:06 PM
LAT Log Analysing Tool V5.1.3 now also supports logs from Poker888.

Invitations for download already send - Balu66


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: Balu66 on February 02, 2013, 09:49:34 AM
Just a link to my optimized code of Bombers MTT Profile V1.12.12

Since I gave up playing poker for over 1 year now, I decided to give something back to the community  beer.gif

The further development of LAT is stopped  for now - but I will carry on implementation of LAT new shanky bot supported poker rooms.

This profile is checked by moderator webber04 and placed in - Shared Free Working Profiles - at the Entry #4
http://bonusbots.com/support/index.php/topic,6367.msg64509.html#msg64509 (http://bonusbots.com/support/index.php/topic,6367.msg64509.html#msg64509)

Good Luck
Balu66


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: miukumauku on March 19, 2014, 09:46:50 PM
could be a great program .. Keith could do with a newer and better ;-)


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: keiths on March 20, 2014, 12:20:19 AM
could be a great program .. Keith could do with a newer and better ;-)

Hi Miukumauku,

Analyzing bot logs is very time consuming and this definitely looks like a valuable tool.  It's unfortunate that Balu66 is unable to devote more time to it, however, it takes alot of time and effort to maintain software like this.  I've definitely thought about creating something along these lines but I can't take on any more projects at this time.  Great job on this Balu66!!

Keiths


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: abcdefg on November 23, 2014, 02:24:30 AM
Hello Balu66,

Is the LAT software still avalible?


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: One Eye JACK on November 20, 2015, 05:22:06 PM
It would be nice if someone would take over and continue work on this project. I have a copy which I purchased off Balu when he or she was active and it does help in tweaking profiles.


Title: Re: LAT - Log Analysing Tool for tweaking Profiles
Post by: cosmo27 on May 05, 2016, 04:57:09 PM
Shoot me an email