Shanky Technologies Poker Bot Support Forum

General Category => Marketplace: Add-on Software and Services => Topic started by: webber04 on September 23, 2018, 02:41:45 PM



Title: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: webber04 on September 23, 2018, 02:41:45 PM
Here is a github link to our open source hopper for shanky.  It was last tested on ACR and Ignition and working well.  We are releasing this in hopes that the community will take this on and provide updates and fixes to allow everyone to use this great tool!  It is written in C# and uses the autoitx library.

This requires you to install Autoit as well for the libraries needed.
https://www.autoitscript.com/site/autoit/downloads/ (https://www.autoitscript.com/site/autoit/downloads/)

If you like it, please be kind and send a donation through Paypal to: pokerbottingtools@gmail.com

The more patches, contributions,  and updates this software gets, the more I will contribute to it as well.
Feel free to post questions/comments...

Below is the link to the github.  You can use tortoisesvn to commit and update changes as well.

https://github.com/pokerbottingtools/ShankyHydraHopper/ (https://github.com/pokerbottingtools/ShankyHydraHopper/)
TortoiseSVN instructions and download link: https://tortoisesvn.net/downloads.html (https://tortoisesvn.net/downloads.html)
Instructions: https://tortoisesvn.net/support.html (https://tortoisesvn.net/support.html)

Here are some screenshots:

(http://i66.tinypic.com/k9thc4.png)

(http://i63.tinypic.com/zvv0ps.png)

(http://i63.tinypic.com/xm5xfd.png)

(http://i66.tinypic.com/10s592f.png)


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: rmcn172 on September 23, 2018, 03:48:15 PM
A compiled version for those of us who are too lazy or  non-developers.


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: UltraFire97 on September 23, 2018, 07:53:58 PM
Stupid Question how can i start it ? :D


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: webber04 on September 23, 2018, 10:32:17 PM
You need to add a sng or mtt to the list to play
You also need to make sure that the lobby is open and logged in
Then click start

As for compiling it, you just need to
- Download the zip of the entire solution.
- Load the solution file into Visual Studio and make sure its in release mode
- Then click Build


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: advantage on September 24, 2018, 11:18:08 PM
When attempting to build it I'm getting a weird error about being unable to find AutoItX3Lib, any ideas?

The specific error is: "The referenced component 'AutoItX3Lib' could not be found", even though the AutoItX3.dll is clearly present. The reference seems broken?


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: webber04 on September 24, 2018, 11:53:14 PM
What is the error exactly?
Its compiling fine on my end
Please post a screenshot of the error you are receiving and Ill look into how to fix it for you.


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: advantage on September 25, 2018, 12:11:48 AM
(https://i.imgur.com/Fyws1EJ.png)


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: MmmBot on September 25, 2018, 12:19:52 AM
Had the same message and had to register my AutoIt dll

That fixed that message but now I'm getting the same not found message for Interop.AutoItX3Lib.



Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: rmcn172 on September 25, 2018, 12:42:34 AM
So much easier for us non-developers if you just make a current exe available.


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: webber04 on September 25, 2018, 01:52:14 AM
I just uploaded it again with the csFTPStarter.exe in the WindowsFormsApplication2\bin\Debug
You will also see the Interop.AutoItX3Lib in there.
If using TortoiseSvn, just do an update on your SVN folder

TortoiseSVN instructions and download link: https://tortoisesvn.net/downloads.html (https://tortoisesvn.net/downloads.html)
Instructions: https://tortoisesvn.net/support.html (https://tortoisesvn.net/support.html)


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: advantage on September 26, 2018, 02:11:41 AM
I'm definitely not a developer of this sort and I've never compiled anything in VisualStudio before, but I'm pretty sure I got it to compile correctly after installing AutoIt (https://www.autoitscript.com/site/autoit/downloads/ (https://www.autoitscript.com/site/autoit/downloads/)) on my computer. The created .exe won't run, and the one you've uploaded doesn't seem to run either edit: runs just fine after installing AutoIt.  I guess the rest of this post is a non-issue, time to test it out more.

So yeah, to anyone having problems, install AutoIt, see the link above.


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: webber04 on September 26, 2018, 06:12:36 PM
I'm definitely not a developer of this sort and I've never compiled anything in VisualStudio before, but I'm pretty sure I got it to compile correctly after installing AutoIt (https://www.autoitscript.com/site/autoit/downloads/ (https://www.autoitscript.com/site/autoit/downloads/)) on my computer. The created .exe won't run, and the one you've uploaded doesn't seem to run either edit: runs just fine after installing AutoIt.  I guess the rest of this post is a non-issue, time to test it out more.

So yeah, to anyone having problems, install AutoIt, see the link above.

Great find!
Any feedback?


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: advantage on September 26, 2018, 08:02:57 PM
Didn't actually get to use it at all, sorry haha. I only have a bankroll at ACR right now and my license is on a Windows 7 machine for that reason, so it's not compatible.


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: webber04 on September 27, 2018, 02:15:34 AM
You can try it out on Windows 7 as well.  It may work, I just didnt test it there.


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: advantage on September 28, 2018, 05:49:49 PM
Nah, I get an error every time I try to load the .exe. Not sure if this is useful to you at all but this is the description:

Description:
  Stopped working

Problem signature:
  Problem Event Name:   CLR20r3
  Problem Signature 01:   csftpstarter.exe
  Problem Signature 02:   1.0.0.0
  Problem Signature 03:   5ba96ab2
  Problem Signature 04:   mscorlib
  Problem Signature 05:   2.0.0.0
  Problem Signature 06:   5b55bfe6
  Problem Signature 07:   e5
  Problem Signature 08:   10
  Problem Signature 09:   System.Security.Security
  OS Version:   6.1.7601.2.1.0.256.1
  Locale ID:   1033


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: webber04 on September 29, 2018, 01:40:20 AM
Nah, I get an error every time I try to load the .exe. Not sure if this is useful to you at all but this is the description:

Description:
  Stopped working

Problem signature:
  Problem Event Name:   CLR20r3
  Problem Signature 01:   csftpstarter.exe
  Problem Signature 02:   1.0.0.0
  Problem Signature 03:   5ba96ab2
  Problem Signature 04:   mscorlib
  Problem Signature 05:   2.0.0.0
  Problem Signature 06:   5b55bfe6
  Problem Signature 07:   e5
  Problem Signature 08:   10
  Problem Signature 09:   System.Security.Security
  OS Version:   6.1.7601.2.1.0.256.1
  Locale ID:   1033

Are you running it from the Debug folder?
Also do you have vcredist 2015 installed?


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: advantage on September 29, 2018, 08:21:09 PM
Yes to both, still no dice.


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: rmcn172 on September 30, 2018, 05:36:06 AM
So why not make an exe available for non-developers rather than see if we can setup a working dev system?


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: webber04 on September 30, 2018, 03:31:21 PM
So why not make an exe available for non-developers rather than see if we can setup a working dev system?

Ill see what I can do for the initial exe
But I dont plan on keeping updating it, hence the reason it is open source.


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: rmcn172 on October 01, 2018, 05:34:59 PM
So you are not treating it has a released piece of software just an idea if any other developers want to use / debug it from there? 


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: fairleadflicking on October 24, 2018, 02:02:03 PM
Ignition upgrade rolling out today. Lets see what changes they make, hopefully not many. I'll work on any changes needed, anyone else going to  update this? We can all collaborate if there r major changes needed.  party0007.gif


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: Himper84 on October 30, 2018, 01:57:47 AM
Crashes on launch on Windows 7. Would anybody be willing to create an executable for this for those of us who aren't familiar with Visual Studio.


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: Csorike on December 18, 2018, 09:08:11 PM
Hello guys,

This is my very first post in the forum, however i'm a member since 2011.
Since wildfire doesnt work anymore its just a pain in the ass...
So I just bringing for the community this easy to setup, click and run portable version of this application.
Hopefully you will enjoy it and will work:) personally i'm using win7 .
Just tried today ,but dont know how to set up the app to auto register on On Demand Freerolls on
Americas Cardroom... Do you have any ideas?

Here is the link for the Hopper, enjoy!

http://www.filedropper.com/app_4


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: webber04 on December 18, 2018, 09:48:07 PM
Hello guys,

This is my very first post in the forum, however i'm a member since 2011.
Since wildfire doesnt work anymore its just a pain in the ass...
So I just bringing for the community this easy to setup, click and run portable version of this application.
Hopefully you will enjoy it and will work:) personally i'm using win7 .
Just tried today ,but dont know how to set up the app to auto register on On Demand Freerolls on
Americas Cardroom... Do you have any ideas?

Here is the link for the Hopper, enjoy!

http://www.filedropper.com/app_4


Set it to Sng Loader and then pick On Demand under GameType


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: Csorike on December 19, 2018, 09:03:22 PM
i did, and started , but nothing..  the app simply vanishing- no clicks no registrations no playing at all. what can be the issue?


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: webber04 on December 19, 2018, 11:47:46 PM
The app actually goes to your taskbar so you can unhide it and see the log detail


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: Csorike on December 20, 2018, 09:22:29 AM
yes i checked but only says: attempt to register... attempt to register... attempt to register... tried to reduct the number of the available tourneys in the lobby to make it easier to find -but still the same.


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: Csorike on December 21, 2018, 07:49:43 AM
Is it anybody here , who can using this app properly and telling me why it doesnt works for me? Or where is an troubleshooting page etc. please ta dankk2.gif


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: johngr on December 21, 2018, 10:36:16 AM
Does this work for Ipoker?


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: webber04 on December 21, 2018, 02:47:51 PM
yes i checked but only says: attempt to register... attempt to register... attempt to register... tried to reduct the number of the available tourneys in the lobby to make it easier to find -but still the same.

Which site are you trying it on?  If I remember correctly when I released the code, was that it was tested on ACR and Ignition for windows 10.  If either of those two sites have done an update since then, then the code will most likely need to be updated.  Feel free to contribute!  If you are trying on any other site, then most likely the code also either needs to be added, or updated.


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: fk11 on December 25, 2018, 01:35:56 PM
Not working on Win 8.1 .
Just get message csFTPstarter has stopped working when I try to open it.


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: webber04 on December 26, 2018, 02:29:49 PM
Not working on Win 8.1 .
Just get message csFTPstarter has stopped working when I try to open it.

Its built for Windows 10
It may need to be recompiled for Windows 8


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: Csorike on December 27, 2018, 07:39:12 PM
Ah alright, i tried only on win7... thanks


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: aethranes on January 10, 2019, 10:29:44 PM
Hi, I've been looking into this breifly, have got as far as loading the app. Although when I click start when using the app with ACR it will breifly open a new ACR window, and then continually ask me if I want to close the ACR window, it will just continue to loop like this then. This is the output I'm getting in the debugger when I debug the app in VS

intNumTables < intCmbBots
NumTables() <= nBotsConnected()
!WaitingForTournament
hshWinList == null || ((int)hshWinList[0, 0] <= NumTables()
bScheduleActive == false || (bScheduleActive && ScheduledToRun()

Might help someone else figure something out, will try and get a bit further when I have any time.


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: webber04 on January 13, 2019, 02:53:29 PM
Hi, I've been looking into this breifly, have got as far as loading the app. Although when I click start when using the app with ACR it will breifly open a new ACR window, and then continually ask me if I want to close the ACR window, it will just continue to loop like this then. This is the output I'm getting in the debugger when I debug the app in VS

intNumTables < intCmbBots
NumTables() <= nBotsConnected()
!WaitingForTournament
hshWinList == null || ((int)hshWinList[0, 0] <= NumTables()
bScheduleActive == false || (bScheduleActive && ScheduledToRun()

Might help someone else figure something out, will try and get a bit further when I have any time.

Most likely its this:
The PixelSearch for the function CheckDeadTables()  needs its coords and possibly color adjusted


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: PokerBot007 on January 18, 2019, 01:17:40 AM
Is this able to handle setting it up to play like 8 or 10 MTT's in a day?  Without the windows getting confused and then crashing?  I'm looking to allow it to run while I'm sleeping, if that's possible.


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: PokerBot007 on January 18, 2019, 04:05:31 AM
Getting this error when attempting to compile:

Code:
System.BadImageFormatException
  HResult=0x8013101B
  Message=Could not load file or assembly 'Interop.AutoItX3Lib, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. This assembly is built by a runtime newer than the currently loaded runtime and cannot be loaded.
  Source=<Cannot evaluate the exception source>
  StackTrace:
<Cannot evaluate the exception stack trace>


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: webber04 on January 24, 2019, 11:42:07 PM
Here is that file
Just add it to your project folder

If after that it still errors out, then you will most likely have to link it.

https://www.mediafire.com/file/1h5y0y7zcjl4cu1/Interop.AutoItX3Lib.dll/file (https://www.mediafire.com/file/1h5y0y7zcjl4cu1/Interop.AutoItX3Lib.dll/file)


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: Pepone on February 06, 2019, 07:37:21 PM
Anyone can rescue this project for coding newbies?

I tried to run the program (downloading Visual Studio, Autoit) but it doesn't work.


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: fleyy on February 19, 2019, 09:12:08 PM
Is it only working for Windows10? I am using Win7 - so no chance it will work?
And does it work for iPoker/Titan?


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: patvo on February 22, 2019, 09:37:53 AM
interested in donating or paying for someones .exe executable version of this, or webber if you could help me out, it would be nice ;) been trying to get it through suggested methods but can't figure it out


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: webber04 on February 22, 2019, 11:11:23 PM
Anyone can rescue this project for coding newbies?

I tried to run the program (downloading Visual Studio, Autoit) but it doesn't work.


I have a vacation coming up but after that I will take a look at it.  But I do need some outside assistance to take this on as I just don't have the time.


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: Clubber348 on March 26, 2019, 07:57:43 PM
I tried to bring back Shanky MTT Hopper/scheduler for myself. I now have a working version of it. It works on ACR and BetOnline mtt only (at least on my laptop).
You can download and try it: https://www.dropbox.com/s/6h98gt8shspyffe/hopper.rar?dl=1
There's also a small user guide inside archive on how to use it.

Not tested it much though. Feel free to post bugs you find.


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: webber04 on March 27, 2019, 11:27:30 PM
I tried to bring back Shanky MTT Hopper/scheduler for myself. I now have a working version of it. It works on ACR and BetOnline mtt only (at least on my laptop).
You can download and try it: https://www.dropbox.com/s/6h98gt8shspyffe/hopper.rar?dl=1
There's also a small user guide inside archive on how to use it.

Not tested it much though. Feel free to post bugs you find.

Nice work!
When downloading it flags as a virus so maybe download from IE
But great to see someone jump in on this!!



Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: asd111 on March 28, 2019, 12:53:38 AM
I would like to become a test for 888.
I have VS2018 and autoit, just need an easy tutorial on how to scrape and modify project solution/source...


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: Clubber348 on March 28, 2019, 10:48:16 AM
Nice work!
When downloading it flags as a virus so maybe download from IE
But great to see someone jump in on this!!

Thanks.
Yes, very annoying that it is flagged as a virus. I myself is forced to mark it as exception in my Windows Defender. Didn't manage to figure out yet on how to avoid this.
But I want to assure everybody that there is no virus, worm or anything else nasty inside it.
I recently downloaded Kaspersky free scanner and it didn't find any problems in it. Also my Windows Defender do not find anything if scanning exe, but marks it as a virus when executing.
May be it's because it tries to disable windows UAC at startup.
I'll try to exclude UAC disabling sometime later.

I would like to become a test for 888.
I have VS2018 and autoit, just need an easy tutorial on how to scrape and modify project solution/source...

I've pretty much rewritten it and invested some time in testing it in supported poker rooms, so I don't want to share sources now.
I read webber's threads and see that very few members wish to donate for developing it. May be that will change later  wink.gif
It takes decent time to add support for a new poker client.
So I think now of adding plugins support in it. So anybody can add support for any poker room and any type of game (like sng, mtt, cash tables etc) by coding a plugin to it.

What do you all think about it?


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: forest212 on January 31, 2020, 12:21:14 AM
(https://i.imgur.com/Fyws1EJ.png)
works on ipoker (888 or Netbet)?  tinfoilhat.gif


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: forest212 on February 03, 2020, 08:35:06 PM
when I enter the ACR application and launch the hopper I get the message that I didn't open the poker application! what is the problem with the hopper recognizing the open application?
 explosion.gif


Title: Re: Open Source Shanky Sng/MTT Hopper/Scheduler (Donations Appreciated!)
Post by: forest212 on February 03, 2020, 08:38:24 PM
The hopper works well on BetOnline but the stakes are from $ 1.5.......