Shanky Technologies Poker Bot Support Forum

I have written a little utulity in Visual Basic which I am making available for free. It is called Profile Cleaner.

The idea of Profile Cleaner is to tidy up your profiles and identify common logic errors which frequently go undetected and can cause strange results. Even the best coders can make such mistakes, especially in large complex profiles, and the program can also be a useful learning tool for newbies.

What Profile Cleaner DOES do
•   Standardize spacing and capitalization in your code.
•   Apply a standard indentation, even when a single code line is spread over more than one line for easier reading, so it is easy to see which code lines belong to which open when.
•   Identify and mark "and/or" conflicts, even in multi-bracketed situations. Only the first error in the line is marked.
•   Identify and mark "or not" code which is incorrect 99.9% of the time.
•   Identify and mark where a code line has more open brackets than close brackets or vice versa.
•   Help identify where you have missed out the Force keyword - the line will not be indented.

What Profile Cleaner does NOT do
•   Overwrite your original profile - it creates a new file.
•   Adjust line spacing in the main code body - this makes it easier to spot "open when" errors.
•   Split long code lines - that's for you to do, if you want to!
•   Identify keywords that have been either spelt or used incorrectly - the bot itself will pick up these errors so it would be re-inventing the wheel.
•   Turn your profile into a guaranteed money maker - sorry I don't do miracles!

The following code is not good ppl and is not good poker - it is designed purely to be untidy, difficult to read, and full of the kind of errors which I often see in profiles people send to me - and indeed in this forum!



Now run it through Profile Cleaner and this is the result:




See how all the errors are marked with *** - do a search for *** in the new file and you will come across all your logic errors (if there are any!) so that you can easily correct them. Can you also spot how the indentation makes the open when error in the preflop code easier to spot? Note how the last line of the flop code is missing its Force keyword and is not indented as a result. Note also that although there was nothing "wrong" with the original turn code it is now much easier to read.

If you want to download and use this utility you can find it here: http://www.mediafire.com/?mmidmmmhu2y (http://www.mediafire.com/?mmidmmmhu2y) read the short ReadMe.txt file before installing.

zulu has tested the script for me and I believe Dman has checked the file for anything malicious - so you can have confidence in it!

ENJOY!

OMIL

You don't even have to install it. 
Just place the ppl file in the right folder
Just rename the executables into .exe (ie delete the .deploy and .manifest extension)

The cleaner works great, #1 !!! :)

were can downlowd

the link is towards the bottom of the first post

Hey egor  nice tool and free very nice. Not really working for me. I tryed it on a full profile and it said it find to thing but i cant fine them ? How i fine them out of 1k lines? The new folder it made is not the same size its not as big ?  . I tryed it on a couple of lines i made and the bot picks up something not right in them but the cleaner dose not pick anything up?

Profile cleaner is not Egors tool. He reposted it as a help from the old forum. As to logic problems found do a search for *** and it will show the lines associated with the logic error. It doesn't mean it won't work as written but alot of them don't. As for the errors in your profile look up the line number shown in the bot after you have Notepad++ (you'll find it in here somewhere). Then look at the code. Alot of my errors are spelling. If you can't figure out the issue post it and someone will help.

lol sorry jackal thought it was egor's work.
very nice and thanks for fast reply ill try some more and see what i can do
if not i might post the code
thanks

PM me if i can help

Just tried out Profile Cleaner - wonderful  dankk2.gif

No problem with normal size code.

But, I am just running a quite large profile with 9MB of code, e.g. bombers profile with 125000 lines of code.
It started and processor is on 50% performance but there still seems no progress.

So the question -  any limitation to codesize ?

woops, just saw, Egor is not the creator of this nice tool - who is it? -  any limitations on length of profile?

edit: Profile Cleaner is still running but no progress (5%) with large file.
Profile Cleaner works good on normal length profiles for me.

^ i'm pretty sure there is. I have the same problem with large code too.

question:

Is this the updated version? that also work with the new ppl variables?

or only working for the old ppl variables?

Thanks.

nice work, working with websites etc I love clean code  thumbsup.gif

I ran this on doodle.txt and it found 4 errors. Are there bugs in doodle??

No. It doesn't like one of the techniques I use where I have a not condition inside a bracket with a positive condition, but since the not condition is last and it is the only one in the bracket it works.

Hi Egor,

I found this when doing the profile cleaning:


when PairOnBoard and (OnlyOneStraightPossible *** or not StraightPossible) and not (FlushPossible or OneCardStraightPossible or Board = AA or Board = KK or Board = QQ or Board = JJ or Board = TT or Board = 99 or Board = 88 or RaisesOnFlop) and Opponents < 3


Whts wrong here? 

thx

wink.gif

yeah sometimes it helps reading the details  :)

Im using event horizon latest version, found 11 errors, someone had this problem? should i be worried?

Thanks alot

depends on the errors

this program is a bit out of date, also some of the "errors" are OK, feel free to start a PPL Board topic and post any of the specific codelines you have questions on

trying running the cleaner for PLO profile and this message came up:
(http://i.imgur.com/sKc7K.png)

must find file ;D

the file i want is there because i browse for it and then click on the file

What's the problem?
(http://www.part.lt/img/f599fa684897e4600223a1e04110c278551.png) (http://www.part.lt/perziura/f599fa684897e4600223a1e04110c278551.png)

the program it's from 2010...it's not update anymore also it doesent works with user variable and maybe some other new symbol.

i think will work with just the older profile.

sick0004.gif

hi my bot play very strange.I heard there is some program such as error checker or something like that, where can i found these programs to check my bot or profile from error?

I have a profile that seems to have alot of errors.. How do i fix that.

Honestly, the best way is to keep attempting to load it and then fix the errors line by line as the bot keeps rejecting it and quoting the next problem code line.

Download Notepad 2 (free, just Google it) to reference the codelines - they are listed on the left side in that.

the link in the first post is down :(

+ 1

Hey, can you post the link to the profile cleaner again?

The link for this is no longer working. Can you re-post working link?

I don't have this file and have never used it. The original post was copied over from the old forum.

Maybe someone who has it can re-post it?

Found it in my archive

link: https://www.mediafire.com/?mkqdtcb4t4sh1s3 (https://www.mediafire.com/?mkqdtcb4t4sh1s3)

Thanks, I downloaded it and gave it a try but it did not work due to errors.  I expect shankybot profiles have changed too much since this program was conceived.

 party0007.gif

Tried this just now on both NL and PLO profiles and it still works great so not sure if the other person had problems for a different reason but I'm glad I tried it anyway.